Horizontal Stab - Part III

Have been plodding along well.  Both skins are fit, and the entire assembly appears straight, and without twist.

My jig appears to have worked very well.  Sighting down the leading edge, it is perfectly straight.  I will need to modify it for riveting, but the concept is perfect.

So now it is on to disassembly, and deburring.  Then the spar cap strips need to be shaped and fit inside the forward spar, and then the aft attach bracket needs to be fit and drilled to the aft spar.

Once those last pieces are done, then it will be cleaning, alodine, and priming.  Then riveting!