Starting to look like an Airplane...

Slow but satisfying progress.

First door installed.  Starting to look like a finished airplane (kinda).

Working on the doors (silpruf between window and doorframe) and ailerons in parallel.  The temp has gotten cold so doing the door silpruf at home.  On my last tube... which is PERFECT.

Right aileron installed.  Push rod not connected yet.  Balance is spot on with the servo tab installed.  Still need to install the pushrod for the tab.

Getting all the bits together for the fuel vent.  Everything sealed and installed.

New connector for the wing tip nav light / strobe (forgot to take picture).  4 position Deutsch bulkhead connector.

The weak bit of the wing tip broke by the fuel vent, so its coming apart.  Need to strengthen that section.  Easy yet time consuming job.

Flap adjustment for full travel, stops and cable tension.  Works like butter.  So happy and grateful.

Prepping the next door for the silpruf layer between the window and the door.

Right wingtip vent assembly.  New connector for the wingtip light.

Aileron in place, but needs spacers, etc.

One last door to silpruf.