Elevator - Part III

Summer's are SLOOOOOOWWW for building progress - BUT, I am getting a bit done.

- Top skins are riveted
- Bottom skins cleecoed 
- Control horns cleecoed
- First trailing edge skin epoxied

Bottom skins are finally on!  And they won't be coming off...

Center section - including control horns - ready for riveting.  Waiting for an offset / bent 1/8" snap to show up from Aircraft Spruce.

See - there really are two skins!

Trailing edge epoxied and clamped with aluminum L brackets and cleecos

Another view of the same - trailing edge clamped.

Todo list:
- Exoxy left hand trailing edge
- Rivet control horn
- Pull rivets on aft skin holes, hard rivets on fore holes
- Then onto the trim tab!